5
10
Hodedah
www.hodedah.com
support @hodedah.com
Assembly Instruction Set A Step 2
Barrel Nut
4 pcs
H
Allen Key
1 pc
CAUTION
When inserting the Dowels to non-thru holes, don't push to hard. Otherwise, the side panels (1,
3, 4 & 6) may be damage.
N
- Fix Panel #6 onto Panels #5. Align properly by inserting the dowel of Panel #6 onto non-thru holes of Panels #5.
- Pushing & light tapping of Panel #6 to have Panel #5 & 6 fix tightly.
- Insert 2 Barrel Nuts H to non-thru holes at Panel #6.
- Then, insert 2 Screw G onto thru holes at Panel #5. Use Allen key N to tighten all the Screws G.
Allen Key
1 pc
3
4
5
- Fix Panel #5 onto Panel #1 by inserting the dowels onto the respective non-thru holes at Panel #1.
- Insert 2 Barrel Nuts H to non-thru holes at Panel #1, 3 & 4.
- Use Allen Key N to tighten 4 screw G from the thru-holes of Panel #5 to non-thru hole of both Panel #1, 3 & 4, as shown.
6
N
G
1
G
G
G
H
H
H
H
JCBC Bolt
M6 x 50mm
4 pcs
G
50MM
Barrel Nut
2 pcs
JCBC Bolt
M6 x 50mm
2 pcs
50MM
G
G
N
H
H
G
H
N
