- Place Panel #7-1 on each side of Panel #9 as shown.
- Then, tighten screw F to Panel #9 lower thru
holes to fix them onto Panel #7-1.
- Place Panel #8 on upper side of Panel #9 as shown.
- Next tighten screw E to Panel #9 upper thru
holes to fix up to the Panel #8.
( 2 )
( 3 )
- Flip drawer upside down, place Panel #10
onto the edges of Panel #9. Then, use Nails I &
gently hammer the borders of Panel #8 spacing it
every 3 to 4 inches.
- Place the Drawer Slide O2 with small white
roller facing outward and the end of the tip
touching opposite panel. Then tighten each 3
screws B on side Panel #9.
- Place Panel #11 into the drawer base and tighten
screw E to fix up to the Panel #7 & 8.
( 4 )
- Flip the drawer over.
- Tighten 2 screw L2 from inner side of Panel #7-1, 7-2 & 7-3
into the Handle L1 holes.
COMPLETED
( 5 )
Assembly Of Drawer
8
Hodedah
www.hodedah.com
support @hodedah.com
- Tighten 2 screw C to Panel #7-1 inner thru hole.
- Repeat same step foe next Panel #7-2 & 7-3.
7-1
( 1 )
7-1, 7-2 & 7-3
9
8
C
C
9
L1
B
O2
O2
I
L2
L2
11
E
10
E
9
9
9
7-1, 7-2 & 7-3
E
E
E
E
E
E
B
B
B
B
B
