HCA Series Installation Manual
Page 30 of 58
V2.15
4.6 Fire Drill
The fire drill function is accessible from both the user and installer menus. Select option 1 from either the
user or installer menu.
Once the Drill option is selected you will see the screen below:
Fire Drill
Yes
Press Enter to start the fire drill. Press No and Enter, or the ESC key to not
start the fire drill and return to the previous menu.
Once the fire drill is active, all notification appliance circuits mapped to at least one zone and configured
for the NAC function will activate with the cadence pattern used for fire alarm. When the fire drill is active
the screen below will be displayed.
Press Any Key To
Stop Fire Drill
Press any of the 15 keys on the keypad to cancel the fire drill. Once
cancelled, a system reset is performed to restore the panel to normal
standby.
4.7 Date/Time Setup
The date and time can be set from option 2 of either the user or installer menus. The first date and time
edit screen that is displayed is below. Choose American or European date/time format.
DATE/TIME TYPE
1Amer 2Euro
Select 1 for North American format. Select 2 for European format.
DATE: 00/00/00
TIME: 00:00 am
At this screen enter the date and press enter. If the date is already correct
you may just hit the enter key to move on to the time setting. Enter the time
and use the 2 key for am or the 7 key for pm and press enter.
USE DST
Yes/No
If day light savings time (DST) adjustment is enabled (Yes), then more
screens will appear for selecting the start and end weeks of DST. Press the
Yes or No key to enable or disable DST followed by the Enter key.
DST START
MONTH nn, WEEK n
The daylight savings time is put into effect on a Sunday at 2:00am. Select
the month and week of the month, at which time DST will go into effect.
Type month (1..12) followed by Enter. Type the week number. Press Enter.
DST END
MONTH nn, WEEK n
The daylight savings time ends on a Sunday at 2:00am. Select the month
and week of the month, at which time DST will end. Type month (1..12)
followed by Enter. Type the week number. Press Enter
Note: If you want DST to start or end on the last Sunday of the month whether it is the 4
th
or 5
th
Sunday,
use 5 for the week of the month parameter.
