Ref : OM_T2
Issued by : SD
Date : 12/2013
Up-date : 0
Page : 34/44
Copyright HCE 2013 - www.hobie-cat.net
E U R O P E
34
Hobie Cat® Europe
Assembly Manual - Hobie T2
Jib sail assembly
Illustration
Etapes Description
5
Ensure that the line is tight and cleated securely.
Enough tension should be applied to remove the
wrinkles from the luff of the sail. The jib halyard
line can be stored in the trampoline pocket.
and the rest of the jib tensioning line in the poc-
ket on the jib.
6
Installation of the jib sheet line
Take the jib sheet in the rope bag and the jib
blocks in the rig bag.
Attach the blocks at the clew point of the jib
using the safety hook.
8
Attach one end of the jib sheet on the fixed point
of the left jib block on the front crossbar, lead it
through the left pulley on the jib, then down into
the block on the crossbar and out through the
cleat. Take it to the opposite side of the boat and
do the same thing in reverse, first the cleat, then
up to the jib, then down to the block and fix the
end to the fixed point of the block.
9
The jib sail can now be furled. Ensure that the jib
sheet is not cleated and pull down the furler line.
When the sail is fully furled, secure the furler
line in the ‘V’’ jam cleat on the rear of the cross-
bar.
