Ref : OM_T2
Issued by : SD
Date : 12/2013
Up-date : 0
Page : 31/44
Copyright HCE 2013 - www.hobie-cat.net
E U R O P E
31
Hobie Cat® Europe
Assembly Manual - Hobie T2
Mainsheet system
Illustration
Etapes Description
1
Take the mainsheet system in the rig bag (n° 6
page 14).
It is already assembled.
2
Fasten the mainsheet ratchet block onto the top
of the main traveller on the rear crossbar.
3
Thread the tail of the mainsheet line through the
traveller cleat, then through the traveller car and
then secure with a figure 8 knot at the eyestrap
on the aft edge of the rear crossbar.
The triple boom block with the safety hook is
ready to headed to the clew point of the main
sail.
NB : It is best to leave the top block unhooked
until the boat is in the water.
