Hobie Hobie T2 Page 2 Owner'S Manual Download

Page: 2 / 44

Ref : OM_T2

Issued by : SD

Date : 12/2013

Up-date : 0

Page : 2/44

E U R O P E

Hobie Cat® Europe

Owner’s manual - Hobie T2

Congratulations for the purchase of your new HOBIE CAT and welcome to the HOBIE sailing family.

The Hobie Cat is a long life boat.

Le Hobie T2 is primarily meant for sailing schools, clubs and beach operators.

We offer this manual as a guide to increased safety and enjoyment of your new boat. The purpose of

this publication is to provide easy, simple and accurate instructions on how to get your Hobie ready for

the water. Please read them carefully and familiarize yourself with the boat and all of the parts spread

before you.

Whether you are a new sailor or a veteran of many years, we recommend that you read this thoroughly

before your first sail and TRY IT OUR WAY FIRST! If you are new to sailing, this manual alone is not

intended to teach you how to sail. There are many excellent books, videos and courses on the safe han-

dling of small sailboats. We suggest that you contact your local sailboat dealer, college or Coast Guard

Auxiliary for recommendations.

Watch for overhead wires whenever you are rigging, launching, sailing or trailering with the mast up.

CONTACT OF THE MAST WITH POWER LINES COULD BE FATAL! Be certain that the rigging area and

the area that you will be sailing in are free of overhead power lines. Report any such power lines to

your local power authority and sail elsewhere.

We take pride in presenting this Hobie T2 to you and hope that you’ll take as much pride in owning her.

Fair winds and good sailing!

Hobie Cat Europe

Welcome in the «Hobie Way of Life»

Summary of Contents for Hobie T2













































Search results

Summary of Contents for Hobie T2

Reviews:

Related manuals for Hobie T2

Brands by name

Popular brands

Hobie Hobie T2, Owner'S Manual

Search results

Summary of Contents for Hobie T2

Reviews:

Related manuals for Hobie T2

Brands by name

Popular brands