EN
18
•
The device should only be used if it has been fully and correctly assembled!
The dust
container and the
fi
lters must be inserted and must not be damaged.
If the dirt were
to get inside the motor unit, this could damage the motor.
•
Switch off the device and pull the mains plug out of the plug socket if an error occurs during
operation, when there is a power cut or before a thunderstorm.
•
The device must be switched off when inserting or removing the mains plug. Always pull the
mains plug and never the mains cable to disconnect the device from the mains power. Never
pull or carry the device by the mains cable.
•
Protect the device from heat, naked
fl
ames, sub-zero temperatures, persistent moisture, wet
conditions and collisions.
•
Use only original accessories from the manufacturer. If accessories which are not authorised by
the manufacturer are used, any warranty claim is void.
•
Do not lay or place any heavy objects on the mains cable.
Before Initial Use
Remove all packaging materials and any possible protective
fi
lms used for protection during
transportation.
Never remove the rating plate and any possible warnings!
Please note that there may be dirt residues in the dust container or in the
fi
lters. These
residues can be attributed to quality checks and do not constitute a defect with the device.
Accessories
The
fl
oor nozzle
is suitable for both carpets and hard
fl
oors. The foot switch allows you to
change between carpet and hard
fl
oor. For hard
fl
oors, a brush is extended on the underside of
the nozzle.
The
combi nozzle
is a combination of a crevice nozzle and brush nozzle. The brush attachment
can be
fl
ipped up or
fl
ipped down:
•
The
crevice nozzle
is suitable for upholstery and for all nooks and crannies that cannot be
reached with other nozzles.
•
The
brush nozzle
is suitable for all uneven objects, furniture, lamps, pro
fi
les and skirting
boards, window ledges, etc.
