EN
14
®
T-28 Trojan S
100%
Adjusting Trim in Flight
Familiarize yourself with your transmitter’s controls
and the aircraft’s response before fl ying by
performing the recommended Control Direction Test.
Press the trim buttons on your transmitter to adjust
how the aircraft fl ies.
If the aircraft’s nose drifts while the sticks are at
neutral (centered) and the throttle is at 50%, press
the trim buttons:
• Upper button to stop up drift
• Lower button to stop down drift
• Left button to stop right drift
• Right button to stop left drift
• Left button to stop right roll
• Right button to stop left roll
If you press a trim button until no beep sounds and the
aircraft does not fl y straight and level, land and manually
adjust the trim as described below.
Manually Adjusting Trim
Press the trim buttons to return to center (3 beeps
will sound), then use a pair of pliers to carefully bend
the metal U-Bend:
Only adjust elevator to neutral position immediately
after powering on and before SAFE has been
activated by advancing the throttle.
• Narrow for negative adjustment
(Down elevator/aileron or rudder left)
• Widen for positive adjustment
(Up elevator/aileron or rudder right)
(Up elevator/aileron or rudder right)
Direction of Drift
Button to Correct
