Hobby 4 CH BlitzRCWorks Sky Surfer RC Trainer Airplane, User Manual, Page: 8 / 15

Assembly Instructions
6 . Attach the elevator servo to the horizontal stabilizer (elevator) .
Glue the horizontal stabilizer into the fuselage as shown. In order to control the movement of
the elevator, you will need to attach the elevator servo's push rod/clevis to the control horn
using one of the long linkage rods that runs along the inside of the fuselage. Make sure to
secure the control horns with the supplied screws and backing plates. Please note that the
elevator and rudders use a similar push rod, do not get them confused.
7 . Attach the rudder servo to the vertical stabilizer (rudder) .
Glue the vertical stabilizer to the end of the fuselage first. In order to control the movement of
the rudder, you will need to attach the rudder servo's push rod/clevis to the control horn using
one of the long linkage rods that runs along the inside of the fuselage. Make sure to secure the
control horns with the supplied screws and backing plates. Please note that the elevator and
rudders use a similar push rod, do not get them confused.
0 5
Must be positioned
this way
Control Arm
Elevator linkage wire
Must be positioned
this way
Rudder
Elevator
Rudder linkage wire