Assembly Instructions
1. Install the main wings.
Install one wing at a time. Push the black wing rod into one wing first
Fix the wing onto the fuselage with the installed wingspar. Afterwards, install the second
main wing to the other side and make sure you can access the aileron servo leads to
connect them to the y-harness on the cockpit side. Afterwards, fix the main wings onto the
fuselage and secure them with the supplied screws.
Aileron servo wire
Push this into the fuselage so
that you can connect it later.
Repeat for the other wing.
2
.
Remove the canopy from the fuselage to connect wires
.
Look for the wires as shown inside the fuselage. These wires will need to attach to the receiver
according to their labels.
0
3
Canopy / Cockpit
Channel 4. Rudder
Electronic Speed Controller
Battery Conector
(Do not connect the battery yet)
Channel 3, Trottle
Channel 2, Elevator
Place glue here.