The battery balance charger that you received comes with a universal adapter
equipped with a voltage system that varies depending on the country. To eliminate the
danger of voltage incompatibility, the manufacturer has supplied a universal adapter
that plugs directly to your car's battery. If you are using this glider in North America,
you can purchase a 12V DC wall adapter from any local electronics store or on our
website at www.bananahobby.com under the name "RC Airplane Parts" and then
clicking on "RC Airplane Parts & Accessories". The charging process may vary
depending on which model balance charger you receive. Please match the battery
charger that you received with one of the chargers below.
To connect the adapter to a car battery, use the end with the red and black alligator
clips. The red is for + (positive) and black is for - (negative). You don't need to turn on
your car. DO NOT charge far more than 1.5 hours. This will damage the battery.
Battery Charging
BC-3S10 2S/3S Balance Charger
1. Plug in the power source to the charger. The power light turns on.
2. Plug in the battery to the charger and the charge light will turn red.
3. When the charge is complete, the charge light will turn green.
BlitzRCWorks BZ-C005 Balance Charger for Lithium Battery Pack
1. Plug in the power source to the charger. The status LED will turn red.
2. Plug in the battery to the charger and the light will blink red.
3. When the charge is complete, this light usually turns solid red or turns off.
BlitzRCWorks V2 Balance Charger (ATI-0910)
1. Plug in the power source to the charger. The light will turn green.
2. Turn the dial between 1. 0A and 0. 3A.
This indicates how fast you want to charge you battery. The recommended setting to prolong
the battery life is 0. 3A but this is the slowest charging rate. If you are in a hurry, you can turn
the dial to 1. 0A for faster charging.
3. Plug in the battery to the charger and the light will turn green.
4. When the charge is complete, the light will turn green.
2S/3S LiPo Charger (YTF1003)
1. Plug in the power source to the charger, The power light will turn on.
2. Plug in the battery to the charger and the left light will blink red.
3. When the charge is complete, the left light will turn green.
Starmax Balance Charger (ST-E00S-A1)
1. Plug in the power source to the charger. The light on the right will turn red.
2. Plug in the battery to the charger and the left light will turn green.
3. When the charge is complete, the left light should turn off.
0
2