Hobby 2015 Vantana, Manual

Page: 89 / 175

Electrical Installations 07-21
Rules for the mains connection
• Use only a 3 x 2.5 mm
2
cable with a maximum length of 25 m,
a CEE plug and connector to connect the van to an external
230 V mains.
• After the mains connection has been plugged in, both the
modular and the vehicle battery will automatically be char -
ged by the battery charger in the van (even if the Control
Panel has not been switched on).
When obtaining electricity via a cable drum, this must be
completely unwound, as otherwise induction may cause
the cable to heat up, which could lead to burning.
(Provided there is no protection against overheating)
• The 230 V mains connection in the van has been designed
for a total power consumption of 3000 W. If additional
devices requiring electricity are connected, such as a water
heater, etc., you must ensure that this electric power value
is not exceeded, taking other electrical equipment in use,
such as the refrigerator, heating, etc., into account.
Repairs must not be carried out on the residual current
device.
A residual current device does not guarantee any protec -
tion against the danger from an electric shock. It does
not protect against possible electrical accidents.
1
2
Residual current device
The standard version of your vehicle is equipped with a
residual current device that will interrupt the electric circuit in
case of a possible residual current. Should there be a mal
-
function, the passenger circuit breaker opens the entire
230 V circuit.