Hobby 2015 Vantana, Manual

Page: 84 / 175

Electrical Installations 07-16
At present, operation via a surfstick is not yet supported.
Please use the WLAN menu in the LCD display to switch
WLAN operation on and off.
After switching it off, “WLAN shutdown” will be displayed
for approx. 60 seconds.
When “WLAN: Off” is displayed, the vehicle's entire power
supply can be switched off.
The SD card may be damaged if the van's power supply
is disconnected (from the mains or the battery) without
having shut down the WLAN correctly.
General information regarding the LCD display
The time and date are buffered by a 3V 210 mAh, CR2032
type button cell. If, therefore, the time should be incorrect
or the clock should stop working, this button cell must be
replaced.
It is mounted on the reverse of the circuit board
j
of the
LCD display. To replace this button cell, the LCD display must
be removed from the furniture front by carefully clipping the
chrome-plated frame out of its holder. You will then see the
screws that fasten the plastic part to the furniture. Loosen
these screws to detach the display.
When replacing the button cell, please ensure that plus
and minus are in the right direction. Incorrect polarity may
cause the display to become defect.
1