Hobby 2015 Vantana, Manual

Page: 103 / 175

Water 08-3
If you fill too much water into the tank, the excess will run out
through an automatic overflow on the opening underneath the
vehicle and possibly also from the filler neck.
Check the red service lids regularly; they may become loose if
the fresh water tank is filled often.
Filling the water system
• Place the van in a horizontal position.
• Shut all of the water taps.
• Switch on the main switch on the control panel.
• Close the outlet valve (FrostControl) on the boiler.
• Unlock the petrol cap and turn it counter-clockwise to open it.
• Fill the water tank using the fresh water filler neck.
• Turn all of the water taps to „hot“ and open them. The
water pump will be switched on.
• Leave the water taps open until the water flows out of the
taps without any bubbles. This is the only way to ensure
that the boiler will also be filled with water.
• Turn all of the taps to „cold“ and leave them open. The cold
water pipes will be filled with water.
• Leave the water taps open until the water flows out of the
fixtures without any bubbles.
• Shut all of the water taps.
• Shut the filler neck.
Never introduce anti-freeze or other chemicals into the
water system.
This can be poisonous!
When operating during winter ensure that the fresh water
tank is sufficiently heated.
Use the control panel to check the amount of water in the
fresh water tank.
To remove water
• The water will be mixed to the desired temperature
according to the position of the pre-mixing unit.