34
ACTIVATOR 80 CHARGER USER’S GUIDE
6) Press and hold the START button for more
than 3 seconds to begin the charging
process. An automatic battery check will
be performed. If you receive an error, press the STOP button to go back to
the previous screen, then carefully check the battery and connections.
5) The input voltage value will be flashing.
Press the DEC or INC buttons to select the
desired input voltage, then press the ENTER
button to store that value.
• Input voltage values range from 2.0 (1P) to 20.0V (10P). The value you choose
should match the nominal input voltage of your battery.
pb (lEAD ACID) bATTERy pROGRAmmInG
pb bATTERy CHARGInG, COnTInUED....
This mode is used for discharging 2 to 20V lead acid batteries. Discharging is
typically used to determine the residual capacity of the battery or to lower the
voltage of the battery to a pre-defined level.
1) Connect the charger to its power source, plug the output power adapter cord
into the power outputs of the charger, then connect the output power adapter
cord to your lead acid battery, making sure the polarity is correct.
pb bATTERy DISCHARGInG
1) Connect the charger to its power source, plug the output power adapter cord
into the power outputs of the charger, then connect the output power adapter
cord to your lead acid battery, making sure the polarity is correct.
3) Press the ENTER button. The charge current
value will flash.
4) Press the DEC or INC buttons to select the
desired charge current, then press the ENTER button to store that value.
• Charge current values range from 0.1 to 7.0 amps. We recommend 0.4C or Less.
2) Press the STOP or DEC buttons to scroll to
the PROGRAM SELECT Pb BATT menu, then
press the ENTER button to open the menu.
When the discharging process begins, the
Status screen will be displayed. This screen
shows various data about the current
process. Press the INC and DEC buttons to
view additional process information.
