ACTIVATOR 80 CHARGER USER’S GUIDE
19
2) Press the ENTER button. The key beep value
will flash. Press the DEC or INC buttons to
select the desired key beep value, then
press the ENTER again to store that value. Choose from ON or OFF.
3) Press the ENTER button. The buzzer value
will flash. Press the DEC or INC buttons to
select the desired buzzer value, then press
the ENTER button to store that value. Choose from ON or OFF.
We recommend keeping the buzzer option ON to hear alerts during use.
• Key Beep and Buzzer default values are ON.
InITIAl USER pARAmETER SETUp
KEy bEEp - bUzzER mEnU, COnTInUED....
This menu controls the charger’s automatic input battery voltage cut-off limit.
When charging from a DC power source, the charger monitors the voltage of
the input battery (your DC power source). If the input battery’s voltage drops
below the programmed value, the operation will be terminated to protect the
integrity of the input battery. Please refer to the technical specification of your
DC input battery to determine the setting to use.
1) From within the USER SET PROGRAM menu,
press the DEC or INC buttons to display the
INPUT POWER LOW CUT-OFF menu.
2) Press the ENTER button. The voltage value
will flash. Press the DEC or INC buttons to
select the desired voltage value, then press
the ENTER button to store that value. Choose from 10.0 to 11.0 volts.
• The default value is 10.0 volts.
InpUT pOwER lOw CUT-Off mEnU
lITHIUm CEll VOlTAGE mETER
The charger features a Lithium cell voltage meter that allows you to quickly and
easily check the current total voltage of your Lithium battery. In addition, it also
displays the current voltage of the highest voltage cell and the current voltage of
the lowest voltage cell in your battery.
The Lithium battery’s balance connector
must be plugged into the charger for this function to work.
1) Press the STOP or DEC buttons to scroll to
the PROGRAM SELECT LI BATT METER menu.
