18
ACTIVATOR 80 CHARGER USER’S GUIDE
2) Press the ENTER button. The ON/OFF value
will flash. Press the DEC or INC buttons to
select the desired value, either ON or OFF,
then press the ENTER button to store that value. The minutes value will flash.
3) Press the DEC or INC buttons to select the desired minutes value, then press
the ENTER button to store that value. Choose from 10 to 720 minutes.
• The default values are ON and 120 minutes.
SAfETy TImER mEnU, COnTInUED....
InITIAl USER pARAmETER SETUp
This menu controls the charger’s capacity cut-off value. This feature sets the
maximum charge capacity that will be supplied to the battery during charge.
As an extra measure of safety, if the delta-peak voltage is not detected or if the
safety timer fails for any reason, this feature will automatically stop the charging
process at the selected capacity value.
CApACITy CUT-Off mEnU
2) Press the ENTER button. The ON/OFF value
will flash. Press the DEC or INC buttons to
select the desired value, either ON or OFF,
then press the ENTER button to store that value. The mAh value will flash.
3) Press the DEC or INC buttons to select the desired mAh value, then press the
ENTER button to store that value. The minimum value is 10mAh.
• The default values are ON and 5000mAh.
We don’t recommend using a value that adds any more than 10% of
your battery’s capacity.
1) From within the USER SET PROGRAM menu,
press the DEC or INC buttons to display the
CAPACITY CUT-OFF menu.
This menu controls the charger’s audio functions. A key tone sounds each time
you press one of the buttons to confirm your action.
There is also an audible tone and/or melody at various times during operation
to alert you to different mode changes, charging process completion, etc. These
audible sounds can be turned ON or OFF.
1) From within the USER SET PROGRAM menu,
press the DEC or INC buttons to display the
KEY BEEP - BUZZER menu.
KEy bEEp - bUzzER mEnU
