9
10
INSTALL THE LANDING GEAR
It is not necessary to remove the front
cowl. Remove the screw from the
fuselage that holds the landing gear plate
to the front of the fuselage. The screw can
be reached by inserting the screwdriver
through the front cowl.
Hold the landing gear in position and
reinstall the plate and screw. Make sure
that the indents in the landing gear plate
line up with the landing gear wire.
Using the pictures on the box as reference, apply the decals to the airplane.
11
ATTACH THE PROPELLER TO THE AIRPLANE
12
APPLY THE DECALS
Install the propeller in the following order:
1. Disconnect the battery first!
2. Slide the prop on the prop shaft and onto the nut.
3. Slide the Spinner Base onto the prop.
4. Slide the Spinner Insert into the base.
5. Using a pliers or small adjustable wrench, tighten the
Spinner Nut so that the prop is secure on the shaft.
6. Attach the rubber Spinner Cone over the end so it seats
over the Spinner Insert.
Landing Gear Plate Screw
(Cowl shown removed
for clarity)
The front of the Prop
has lettering
Landing Gear Plate
Landing Gear
Prop
Prop Shaft
Spinner
Insert
Spinner Nut
(5.5mm)
Spinner
Base
Spinner
Cone
