7
5
INSTALL THE BATTERY
6
ROUTE THE ANTENNA WIRE & INSTALL THE WING DOWELS
(A) Pull up on the hatch when opening.
(B) Battery Pack
(C) Slightly bend the hatch to snap it closed.
A. Remove the battery hatch from
the bottom of the fuselage.
B. Make sure the switch is off and
then plug in the battery.
C. Reinstall the hatch.
Route the antenna wire through the
tube in the top of the fuselage and tape
the end to the top of the fin. Important:
Do not cut off the excess antenna wire.
If the antenna is cut off, it will reduce the
range of the radio system.
Install the two aluminum wing dowels
into the fuselage. Position them so they
are centered.
Tube
Aluminum Wing Dowels
RECEIVER ON/OFF SWITCH
Tape
Antenna
