Hobart CLF26D-10 Instruction Manual Download Page 5

INSTRUCTION MANUAL FOR DISHWASHERS

 

Page 4 of 15

 

 

GB 

 

 

 

Free drain 

2.5

 

Connection to the drain line

 

The drain line must be made up of a free water 
trap
 of a size proportionate to the delivery of the 
drain pipe supplied with the machine. The pipe 
must be able to reach the water trap without 
being pulled, squeezed, bent, crushed, pressed 
or forced by anything
.

 

 

The tank empties by gravity, so the drain must be 
at a lower level than the base machine.

 

 

Max. 

1 m 

 

 

With discharge pump (available on 

request) 

  If the drain is not at a lower level than the base of 

the machine, you can use the version equipped 
with a discharge pump (available on request). 

  In this case the maximum drain height is 1 m. 

  Always check that the drain works properly and 

that it is not clogged. 

  All other solutions must be previously agreed upon 

and approved by the manufacturer. 

Chap 3

 

RISKS AND IMPORTANT WARNINGS

 This 

appliance is to be used only for the use for which it was expressly designed. All other uses 

are to be considered unfit and therefore dangerous. 

 

  The specialised personnel who will install the machine is obliged to appropriately instruct 

the user on the appliance’s operation and any safety measures that are to be complied 
with, also by providing practical demonstrations. 

 

  Any type of service done on the machine, also in the case of failure, must be performed only by 

the manufacturer or by an authorised service centre and by qualified personnel, using only 
original spare parts

  Always disconnect or separate the machine from the electric and water networks before 

performing maintenance, repairs or cleaning. 

 

  Untrained personnel must NOT use the machine. 

  The machine must NOT remain live when it is not used. 

 

  NEVER open the machine door quickly if it has not finished the cycle. 

  NEVER use the machine without the factory-installed safety attachments. 

  NEVER use the machine for washing object of a type, shape, size or material not guaranteed for 

machine washing or not perfectly intact. 

  NEVER use the appliance or its parts as a ladder or support for people, things or animals. 

  NEVER overload the open door of front-loading machines, which are sized to support only the 

rack loaded with kitchenware. 

  NEVER immerse bare hands in the washing solutions. 

  NEVER turn the machine over after installation. 

Summary of Contents for CLF26D-10

















Reviews: