HNP Mikrosysteme mzr-2961 Operating Manual Download

Page: 49 / 58

EC-manufacturer’s certificate

(following EMC Directive 2014/30/EU)

We hereby declare that the following micro annular gear pump of the magnetic

hermetic series:

mzr-2961, mzr-4661

are intended for installation into another machinery/plant and that start of

operation is forbidden till it is identified that the machinery/plant into which

these micro annular gear pumps shall be installed corresponds to the

regulations of the EC guidelines regarding safety and health requirements.

We confirm the conformity of the product described above to the following

standards in terms of applied directives

−

EMC Directive (2014/30/EU)

Applied standards are particularly

EN 61000-6-4 (10/01):

Generic standards – Emission standard for

industrial environments

EN 61000-6-2 (10/01):

Generic standards – Immunity for industrial

environments

This statement does not warrant any characteristics in terms of product liability.

Please note the safety instructions in the manual.

Date: 19 April 2016
Signature manufacturer:

Dr. Thomas Weisener

CEO

Summary of Contents for mzr-2961



























































Search results

Summary of Contents for mzr-2961

Reviews:

Related manuals for mzr-2961

Brands by name

Popular brands

HNP Mikrosysteme mzr-2961, Operating Manual

Search results

Summary of Contents for mzr-2961

Reviews:

Related manuals for mzr-2961

Brands by name

Popular brands