16
Step 2
a. Slide the part (#79, #39, #33) through the Guide Rods (#4) in turn.
Note: Carefully slide the Weight Plates (#33) one by one onto the guide rods, do not lift more then you can control safely.
b. Set the Weight Bushing(#35) onto the Selector Bar(#37) and attach it at the first hole of the Selector Bar(#37) using the Weight
Pin(#36). Insert the Bar (#37) into the hole of Weight Plates (#33). Slide the Top Weight Plate (#32) onto the Weight Stack. Set the
Weight Washer (#34) onto the socket of Top Weight Plate (#32).
Insert the “L” Pin (#38) through the Bar (#37) to obtain proper
weight.
c. Slide the part (#80) through the part (#4).
d. Insert the Plug 38*38 into the part (#5) and then set the End Cap 38*38 (#48) onto the part (#5).
e. Insert the Plug (#47, #49) into the part (#1). Attach the part (#1, #22) to the part (#5) using (2) Hex Bolts M10*50 (#68).
f. Maneuver each of the Guide Rods (#4) into the holes of part (#1), and then attach the part (#1) to the Guide Rods (#4) using (2)
Hex Bolts M10*25 (#65).