15
ASSEMBLY INSTRUCTION:
Note:
1. Washer should be placed on both ends of all bolts (against the head of the bolt and against the nut) unless otherwise
specified in these instructions.
2. Hand tighten all bolts on initial assembly and finally tighten with the wrench once the entire structure is erect.
3. Some parts may be pre-assembled at the factory.
4. Assembly requires the assistance of another person.
Step 1
a. Insert the Plug 70*30 (#49) into the parts(#2, #6, #12).
b. Attach the part (#12, #2) to the part (#6) using (2) Hex Bolts M10*55 (#69).
c. Attach the part (#4) to the part (#2) using the Countersunk Bolt M10*20 (#76). Wrench tighten the bolt here.
d. Attach the part (#5) to the part (#2) using (4) Nylon Lock Nut M10 (#63) and (4) Flat Washer 10 (#59).
