HMS M6160-i, Manual Instruction

Page: 48 / 92

48
M6160-i
Notices and warnings:
1. Without receiving any reply comment of communications protocol, the APP would continue
sending signal and wait for acknowledging. And over 15 seconds the tunelinc would off line,
and user needs to reset (such as: phone, message, or any sound disturbance comes in. In 15
seconds the connection would continue but if over 15 seconds, user needs to reset).
2. TUNELINC's audio cable connector is 4 pin, and the length limit is 50cm.
3. TUNELINC's audio cable be sure to use the factory supplied to achieve high quality
transmission. If using non-original audio cable, not only affect the transmit performance but
also may happened unexpected result and we can not provide assistance by then.
4. After insert the Tunelinc into audio jack do not rotate. The audio cable can not be curl to
prevent effect inductive action and avoid lead to poor contact of transmission.
5. As using Tunelinc do not put any device on charge in order to reduce the interference of the
transmission.
6. Do not put the Tunelinc audio cable connector in a humid environment.
7. Due to operate iC APP needs to increase the volume, therefore, if the device display
the volume warning message, the user needs to press confirmation for beneficial APP
subsequent operations.
8. If BT and Tunelinc are connecting at the same time then the console would select BT as the
main connector.