HMS M6160-i, Manual Instruction

Page: 42 / 92

42
M6160-i
Operation
1) When monitor power on (or press MODE, RESET key and hold for 3 seconds), LCD will display all
segments with Bisound for one second and enter to SCAN mode as Drawing B.
2) With any signal been transmitted into the monitor, the value of TMR, DST, and CAL will start to
count up as Drawing C.
3) Without any signal been transmitted into the monitor for 4 minutes, the monitor will enter to SLEEP
mode.
Trouble shooting
When the display show Drawing D, it means the batteries need to be changed.
If there is no signal when you pedal, please check if the cable is well connected.
Battery low display
Drawing D
NOTE
1. Compatible with iOS and Android system
2. Console and mobile device connection via Tunelinc, once connecting, the display will be off.
3. Stop training for 4 minutes, the main screen will be off.
4. If the computer displays abnormally, please re-install the battery and try again.
Drawing B Drawing C