STEP 5
(See Diagram 5)
G.)
Attach two Ø 5/8” Bushings (#20) to the Leg Developer (#10). Attach the Leg Developer to
the Leg Developer Holder (#7). Secure it with one M10 x 3 1/8” Allen Bolt (#36), two Ø ¾”
Washers (#41), and one M10 Aircraft Nut (#44).
H.)
Insert three Foam Tubes (#13) halfway through the holes on the Leg Developer and Leg
Developer Holder. Push six Foam Rolls (#27) onto the Tubes from both ends. Plug six Foam
Roll End Caps (#26) into the ends.
I.)
Slide an Olympic Sleeve (#29) onto the weight post on Leg Developer. Attach a Spring Clip
(#30) onto the Sleeve.
J.)
Attach the Arm Curl Pad (#18) to the Arm Curl Stand (#11). Secure it with two M8 x 5/8”
Allen Bolts (#39) and two Ø 5/8” Washers (#42).
K.)
Insert the Arm Curl Stand into the Leg Developer holder. Use the M10 Lock Knob (#28) to
lock the Arm Curl Stand in position.
L.)
Remove the Arm Curl Stand when doing Leg Developer exercises.
DIAGRAM 5
Summary of Contents for LS3859
Page 30: ...N K R E S...
