3.
speed window
：
during exercise ,display shows current speed
value
，
speed display range is: 0.5-6.0KM/h.
Key functions
1.
Start/stop: at standby mode,press this button to start the treadmill; press this button
while exercie to stop the device.
2.
Speed+: while exercie,press this button,to increase the speed each 0.1km/h
3.
Speed-: while exercie,press this button,to decrease speed each 0.1km/h
First use.
Connect the power plug. Turn on the switch. The devise will make warning sound. After that
the devise will enter standby mode. Pressing start button starts the treadmill with lowest
speed
The computer will start count speed ,time, calorie, distance and steps.
Change current speed using buttons speed+ and speed-.
Error codes:
1. Er 3
：
Over voltage
2. Er 4
：
IGBT short circuit
3. Er 5
：
Over load
4. Er 6
：
Motor lose contact
5. Er 7
：
Main board does not receive signal
6. Er 13
：
Over current
7. Er 14: Overload short circuit
Summary of Contents for LOOP15
Page 1: ...LOOP15 BIE NIA TREADMILL B ECK P S LAUFBAND...
Page 44: ......
