AB7609 Installation Guide
5
© 2005 HMS Industrial Networks.
Setting MAC ID and Baud Rate Using the Anybus-X Configuration Tool
The DeviceNet configuration can be set using the BWConfig tool. When
launched, the tool (shown below) will allow the DeviceNet configuration to be
edited and downloaded to the module. Once the configuration has been down-
loaded, the Anybus-X will be reset automatically by the tool. See the Configura-
tion section of the user manual for complete details on using BWConfig.
Setting MAC ID and Baud Rate Using a Node Commissioning Tool
A DeviceNet node commissioning utility, such as RSNetworx or NetTool-DN,
may be used to change the MAC ID and baud rate settings. Refer to the user doc-
umentation for the tool being used, or the Anybus-X user manual for more details.
