14 (44)
5.1.3
Network Settings
Fig. 9
Network Settings page
IP Assignment
Select static or dynamic IP addressing (DHCP)
IP Address
Static IP address for the unit
The browser should automatically be redirected to the new address after clicking on
Save and Reboot
(not supported by all browsers).
Subnet Mask
Subnet mask when using static IP
Default Gateway
Default gateway when using static IP
Internal DHCP Server
Disabled:
No internal DHCP functionality
DHCP Relay Enabled:
The unit can receive a DHCP request on one interface and resend
it to a DHCP server located on one of the other interfaces.
Only a single DHCP server can be active for all the connected interfaces.
If WLAN is used, the forwarding mode must be set to Layer 3 IP Forward.
DHCP Server Enabled:
Activates an internal DHCP server. This option is only available
when IP Assignment is set to Static.
To avoid IP address conflict if a DHCP server is already active on the network, use the
DHCP Interfaces
setting to limit the internal DHCP server to the correct interface.
Anybus
®
Wireless Bolt Serial
™
User Manual
SCM-1202-143 1.10 en-US
