15 (44)
DHCP Interfaces
The
DHCP Interfaces
function is available when
Internal DHCP Server
>
DHCP Server
Enabled
is selected.
All:
By default, the DHCP Interfaces function is set to use all interfaces.
Wired Ethernet:
The internal DHCP server only listens for clients on the wired Ethernet
interface.
Wireless Interfaces:
The internal DHCP server listens for clients on all supported wireless
interfaces (WLAN/Bluetooth).
Start Address (Y)
The internal DHCP server will assign up to 7 IP addresses starting from
X.X.X.Y
, where
X
is taken from the current static IP address setting, and
Y
is the value in
Start Address
.
Already allocated addresses will be skipped, including the address of the unit itself. The
subnet mask setting will be ignored.
Examples:
IP Address: 192.168.0.99, Start Address: 101
DHCP range = 192.168.0.101 – 192.168.0.107
IP Address: 192.168.0.103, Start Address: 101
DHCP range = 192.168.0.101 – 192.168.0.108
7 addresses are allocated but the address of the unit is skipped.
Anybus
®
Wireless Bolt Serial
™
User Manual
SCM-1202-143 1.10 en-US
