9 (44)
4.5
RESET Button
Fig. 4
RESET button
The
RESET
button is located on the bottom of the unit.
When the unit is powered on, press and hold
RESET
for >10 seconds and then release it to reset
to the factory default settings.
Recovery Mode
If the web interface cannot be accessed, the unit can be reset by starting in
Recovery Mode
and
reinstalling the firmware using Anybus Firmware Manager II, which can be downloaded from
To enter Recovery Mode, press and hold
RESET
during startup.
Firmware updates should normally be carried out through the web interface. Recovery
Mode should only be used if the unit is unresponsive and the web interface cannot be
accessed.
Anybus
®
Wireless Bolt Serial
™
User Manual
SCM-1202-143 1.10 en-US
