HMF LEOFANT 24 ABB2471, Instruction Manual

Page: 14 / 16

© HMF, 48336 Sassenberg-Füchtorf
Seite 14
8.3 Maintenance of the propulsion

Before the first introduction the oil level must be checked!

The propulsion has to been checked of leakage and filling quantity after 20 hours
of working.

At the front of the dam-former Leofant there is the gearbox, in which you find the
propulsion for the driving and for the rotors.

Every 20 working hours you also have to check this for leakage and filling quantity.

The quantity of the oil is enough, when you can see the oil in the looking glass
while the machine is standing horizontally.

If necessary, fill up with gear oil CARTER SH 320. With use of a tractor with more
than 120
HP, we recommend the use of “ CARTER SH 320” High quality oil.

Change the oil once a year.

The filling quantity is 10
– 12.5 L at each side.
8.4 In case of longer breaks between using

Clean up the dam-former Leofant, do the lubrication as described in this instruction
manual (see lubrication plan p. 7) and spray with oil.

Front this (optional), back tins and dam forming metals (not on the plastic) have to
been spread with grease after the cleaning.

Damages in the lacquer have to been repaired.

If you have a cardan shaft with slipping clutch, then you have to remove the air
after longer non-using.