1
Figure 1. Base station
I.
GENERAL
The System 900 is a wireless audio system primarily for use at quick-service restaurants.
II.
EQUIPMENT FUNCTIONS AND USE
A. Base Station
Front –
System indicator lights
!
!
POWER light
is on when the base station has power.
!
!
MESSAGE RECORD
light
is on
RED
when the base station is ready to record
message #1 for the message repeater, and blinking
RED
while message #1 is
being recorded. It is on
GREEN
when the base station is ready to record
message #2 for the message repeater, and blinking
GREEN
while message #2
is being recorded. The MESSAGE REPEATER button must be pushed IN.
!
!
RECEIVE light
is used only for troubleshooting, but is also on during channel-A
and channel-B transmissions.
!
!
“A” light
is on during channel-A transmission.
!
!
“B” light
is on during channel-B transmission.
!
!
VEHICLE light
is on when a vehicle is present in the drive-thru lane or when the
system is in vehicle-detect override.
Bottom –
!
!
PUSH FOR RECORD MODE button
; must be pushed IN and released once to
prepare the base station to record message #1 for the message repeater, or
pushed IN and released twice to record message #2.
!
!
MESSAGE REPEATER button
; must be pushed IN to use the message repeater,
OUT when the message repeater is not being used.
!
!
SPEED TEAM button
; must be pushed IN for speed-team operation, OUT for
normal drive-thru operation
!
!
VEHICLE DETECTOR button
; to override a vehicle detector, push and leave IN: to
reset vehicle detector, push IN and leave In for 5 seconds, then push again and
leave OUT for normal vehicle detection.
Left Side –
!
!
WIRED/WIRELESS button
; must be OUT when using the wireless System 900, IN
when using a wired backup system.
