7
Figure 6.
Battery replacement
5.
Configuration Settings
•
With the power already on, press and hold the Power button
and press the
B button. NOTE: You must press the B button within 2
seconds after pressing the power button, or you will turn
the power off and have to begin again.
•
You will hear “ Configuration” in the headset.
•
Select the desired configuration setting described in “ a ”
or “ b ” below.
•
When finished, press and release the B button to exit the
configuration-settings mode. You will hear “ Power on,
lane (one or two) ” in the headset.
•
Configuration settings will remain in effect until you
change them again.
a.
Hands-free On/Off
•
Touch and release the Volume-down button — you will hear
“ H ands-free on. ”
•
Touch and release the Volume-down button again — you
will hear “ H ands-free off. ”
•
You will continue to hear “ Hands-free on ” or “ H ands-
free off ” messages alternating each time you touch and
release the Volume-down button.
The last hands-free on/off message heard will be
selected when you exit the configuration-settings mode.
b.
Single/Dual Lane
•
Touch and release the A1 button — you will hear
“ S ingle lane. ”
•
Touch and release the A1 button again — you will hear
“ D ual lane. ”
•
You will continue to hear “ Single lane” or “ Dual lane ”
messages alternating each time you touch and release the
A1 button. The last single/dual lane message heard will
be selected when you exit the configuration-settings mode.
6.
Battery Removal and Replacement
If you hear “ Headset Battery Low ” in the headset, its
battery needs to be replaced and recharged. HS500 batteries
need be recharged after 8 to 9 hours of normal use.
a.
Battery Removal
•
Push the battery-release latch upward.
•
Pull the battery out from the top.
b.
Battery Replacement
•
Place the end of a battery into
the battery
compartment, with its metal
contacts
downward.
•
Press the top of a battery into
the battery
Figure 5.
Battery removal
Batte
ry
relea
se
l
h
