11
!
Alert tone (double beep) sounds, then customer can be heard at speaker
post or menu board.
!
Adjust customer’s voice level in headset if necessary.
!
Touch and release A1 button for Lane 1 or A2 for Lane 2, to speak and
listen to customer.
!
Touch and release A1, A2 (depending on lane) or B button to end
communication
with customer.
!
Touch and release A1 button for Lane 1 or A2 for Lane 2, to speak to
the customer again.
!
To change lanes, touch and release the opposite A button.
!
If customer drives away from speaker post or menu board, headset
automatically stops transmitting.
Auto Hands-Free (AHF) Mode:
!
Alert tone (double beep) sounds, then customer can be heard at speaker
post or menu board.
!
Adjust customer’s voice level in headset if necessary.
!
Speak and listen to customer without pressing any buttons.
!
Touch and release A1, A2 (depending on lane) or B button to end
communication
with customer.
!
Touch and release A1 button for Lane 1 or A2 for Lane 2, to speak to
the customer again.
!
To change lanes, touch and release the opposite A button.
!
If customer drives away from speaker post or menu board, headset
automatically stops transmitting.
C.
Message Repeater Operation
To record messages for the message repeater, press the MESSAGE
REPEATER button in, on the bottom of the base station, and do the
following:
ACTION
RESULT
Press and release the RECORD
MODE button on the base
station once.
The red MESSAGE RECORD
light on the base station
will come on.
Press and hold button B on
the headset and talk into the
headset microphone to record
a message.
The MESSAGE RECORD light on
the base station will begin
blinking.
To record
Message
#1
Release button B.
The record function will
stop and the MESSAGE RECORD
light will go off.
Press and release the RECORD
MODE button on the base
station twice.
The green MESSAGE RECORD
light on the base station
will come on.
Press and hold button B on
the headset and talk into the
headset microphone to record
a message.
The MESSAGE RECORD light on
the base station will begin
blinking.
To record
Message
#2
Release button B.
The record function will
stop and the MESSAGE RECORD
light will go off.
NOTES:
Locate the S7 and S8 DIP switches at the bottom-center of the
audio circuit board inside the base station for the following
settings.
Message #1
•
S8 switch #7 in the ON position enables Message #1 to be
played.
•
will be triggered by a vehicle present signal if S7 switch 5
is in the OFF position. The playing message can be cancelled
by pressing button A on the headset.
