16
SECTION 4. EQUIPMENT OPERATION
THE BASICS
Base Station Operation
Headset volume
Channel select button
(O, All or X)
Channel select button
(O, All or X)
Green
: Listen only
Red
: Talk and listen
Talk button
(Push ON - Push OFF)
1
Press base station
POWER
button
to turn on power .
2
Place the left or right headset on your head, then use the left or right base station headset controls to adjust .
3
Adjust the headset volume as needed .
4
Press the channel
SELECT
button
; a Green light appears above
O
,
ALL
or
X
selection ― Press the
SELECT
button
again to change selection .
5
To talk to beltpac or all-in-one headset users, press and release
TALK
button
− the Green light turns red. Talk and
listen as you would in normal telephone conversation . Press and release
TALK
button
again when you finish talking.
(You will still hear the other users, but they will not hear you .)
6
To turn base station off, press and hold
POWER
button
until the lights turn off .
CAUTION:
Having your headset at a high volume level for a long time can cause hearing damage .
NOTE:
Base station TALK buttons do not activate relay closures .
