15
Beltpac Adjustments
Sidetone Adjustment
When you speak into the microphone, you can hear sidetone (your own voice) in the beltpac headset .
Sidetone can be adjusted as follows:
1
Be sure the beltpac power is on .
2
While holding down the “
O
” button, press the volume-up (
) or volume-down (
) button as many times as needed to
reach an acceptable level . If you reach the high limit, you will hear “maximum” in the headset . If you reach the low
limit, you will hear double beeps .
Maximum sidetone level is recommended .
Microphone Gain Adjustment
Some users speak louder or softer than average .
The microphone gain adjustment helps to compensate for extremes in speaking level of coaches using beltpacs .
NOTE:
The microphone gain can be monitored through sidetone, at the base station or preferably
by someone else using a beltpac .
NOTE:
Microphone gain and sidetone adjustments will be saved in memory . A reset is not
required when the unit is powered off and on .
1
Be sure the beltpac power is turned on .
2
While holding down the “
X
” button, press the volume-up
or volume-down
button as many times as needed to
reach an acceptable level . If you reach the high limit, you will hear “maximum” in the headset . If you reach the low
limit, you will hear double beeps .
Recommended microphone gain levels are:
• Beltpacs – 12 presses down from maximum
• All-in-one headsets – 8 presses down from maximum .
