7
SECTION 3. EQUIPMENT SETUP
BATTERY CHARGER
NOTE:
Set up the battery charger and charge all beltpac batteries while you are setting up the
base station .
Power Supply
Power Supply Cord
1
Connect power supply to charger and electrical outlet .
2
Charge all beltpac batteries . Charging time is approximately three hours .
Put up to 4 batteries
in charging ports
Storage ports for
charged batteries
Status lights next to each charging port
Red light
●
Stays on steady while battery is charging
Green light
●
Goes on when battery is fully charged
Yellow light
●
Stays on steady when charging port is empty
●
Flashes if battery is too hot to charge
●
Next to battery in charging port means charge has failed – See instructions on side of charger
AC40 Battery Charger Setup
