HLF Italian Design 1700, Service Manual

Page: 98 / 115

TROUBLESHOOTING
Bluetooth module connection procedure
Everytime there’s the need to replace the
Bluetooth module or the touch screen , the
connection must be set up from the beginning.
1. Enter the programming > Settings > BLUETOOTH
2. Press the button RESET DEVICE LIST to clear all the devices previously
registered. (all the buttons should become unavailable for few seconds)
3. Once the buttons are back available, press SEARCH ;
4. On the “Bluetooth device search” window Press SEARCH again. The touch
screen is now searching for any bluetooth device around;
During the searching, the button SEARCH turnes into STOP . Once the touch
screen has finished the searching it will turn back to SEARCH again. (This could
take even few minutes);
5. Push on the device that’s named with the serial number of the machine (i.e.
140000123) The message CONNECTING… will be displayed in yellow;
6. After few seconds the touch screen will ask for a PIN. Put 1234 ;
7. In few seconds the message CONNECTING… should turn into CONNECTED
displayed in green;
8. Go all the way back pushing the arrow on the the top left corner.
HLF Italian Design
14-18 S.M. HLF 1700 G1-F Eng V0-2016