14
Setting of the individual paramater
By selecting "Programs" in the start menu, you will have a total number of 30
different (recurrent) program steps available. These can be selected in up to 9 dif-
ferent programs. You have the choice of f. ex. either 9 programs with 3 program
runnings each or f. ex. 1 program with 30 program runnings. For normal operation
the choice will be somewhere in between.
"prog-no."
is blinking and shows 1 as standard. By pressing
ok
any program num-
ber. between 1 and 9 can be selected using buttons
+
and
–.
Confirm your entry by
pressing
ok
and the next field "cycles" will be blinking.
Cycles
= Number of repetitions of the program, selection 1-9 possible without
having to confirm "Start" again.
If no changes are to be made, select the next field by using the
-
(down) button.
By pressing
ok
you can change the number of cycles from 1 to 9 using the
+
and
–
buttons. Confirm your entry by pressing
ok
and the next field "step"
will be blinking.
Step
= Section within a program. Selection 1-9 possible.
If no changes are to be made, select the next field by using the
–
(down) button.
