VIITS-SS001
-
16
-
7. Adjusting the Ride Height
HKS has preset the ride height prior to shipment.
6. Camber Adjustment
1. Jack up the vehicle. Make sure wheels do not come in contact with
the ground surface.
2. Loosen 4 of the camber adjustment bolts indicated by an arrow in
the Diagram 5
-
1.
3. Move the pillow ball to the position to adjust the camber angle.
· Move inward of the vehicle: Increase the camber angle (fall over).
· Move outward of the vehicle: Decrease the camber angle (stand).
4. Tighten the bolts loosened in 2. (Torque Specs: 9N·m)
* Adjustable range of the camber angle may vary.
* If it is difficult to adjust the camber angle while this product is installed
in the vehicle, remove the suspension for adjustment.
↓
Outer side of the vehicle
5
-
1
31214T · 312141
Vehicle Height Data (inch)
When Shipped During Testing
Upper Limit
Lower Limit
When Shipped During Testing
Upper Limit
Lower Limit
Height
23.5
←
24.8
22.1
23.9
←
24.9
23.2
Height From Factory
-1.0
←
0.3
-2.4
-1.3
←
-0.4
-2.0
Shock Body Length
11.9
←
12.4
11.1
7.7
←
7.9
7.7
Spring Length
8.3
←
7.8
8.8
-
-
-
-
Thread Length
1.5
←
2.6
0.4
1.1
←
1.9
0.6
31214T · 312141
Vehicle Height Data (mm)
When Shipped During Testing
Upper Limit
Lower Limit
When Shipped During Testing
Upper Limit
Lower Limit
Height
597
←
629
561
607
←
632
589
Height From Factory
-25
←
7
-61
-34
←
-9
-52
Shock Body Length
301
←
314
283
195
←
200
195
Spring Length
212
←
198
224
-
-
-
-
Thread Length
39
←
66
9
28
←
47
14
FRONT
REAR
FRONT
REAR