VIITS-SS001
Rear Ride Height
Adjuster Assy
4
-
2
-
13
-
4. Installing the Rear Suspensions
NOTICE
Refer to the service manual for torque specs when tightening bolts and nuts. Make sure to tighten the bolts
and/or nuts to the specified torque to avoid the damage to the bolts, nuts and/or shock absorber internals.
4
-
4
Collar and Bolt
③
2. Referring to “Suspension Components” on page 6, install the following
to the vehicle:
The provided M8 hexagon socket button bolt
The provided M8 nylon lock nut
The provided M8(
φ18
) washer
The provided thick spacer
The provided thin spacer
The provided rear ride height adjuster assy
The provided M8(
φ18
) washer
(Torque Specs: 20N·m)
(Diagram 4
-
2)
3. Install the bump rubber assy .
(Diagram 4
-
3)
4. Referring to “Suspension Components” on page 6, install the following
to the vehicle:
The provided rear shock absorber assy
The provided collar.
Temporarily install the upper rear shock absorber assy installation
bolt
③
.
(Diagram 4
-
4, 4
-
5)
1. Install the inner fender for the right side
⑤
.
(Diagram 4
-
1)
4
-
3
Bump Rubber Assy
4
-
1
⑤