㧙㧙
4-4. Securing Hoses and Harnesses
5. After Installation
(1) Reinstall all removed factory parts.
(2) Reconnect the negative cable to the battery.
(1) Secure hoses and harnesses using the provided Tie Wraps.
NOTE
̪
Leave some slack for the harnesses and hoses to avoid tension during engine movement.
CONFIRMATION AFTER INSTALLATION
NOTE
̪
Do not raise the engine RPM right after the engine is started. (Let it idle.)
CHECK
CHECK
˴˴˴˴˴˴˴˴˴˴˴˴˴˴˴
ITEMS TO CHECK
Make sure hoses are routed and connected correctly.
Make sure hoses are not loosened.
Make sure hoses are not damaged.
Make sure hose clamps are tightened.
Make sure all bolts and nuts are tightened securely.
Make sure all installed components do not come in contact with any other parts.
Make sure all installed parts are properly secured.
Make sure wiring is done correctly.
Make sure crimp connectors are connected securely.
Make sure proper crimp connectors are used and crimped securely.
Make sure the installed parts are mounted securely and do not interfere with driving.
Make sure the negative cable terminal is securely attached to the battery.
Make sure the boost pressure control solenoid valve is deactivated.
Check the following after the installation process is complete:
1. Check the following after the installation process is complete:
2. Start the engine and check the following:
˴˴˴˴˴˴˴˴˴˴˴˴˴˴
ITEMS TO CHECK
Make sure air is not leaking.
Make sure the RPM rises smoothly after revving the engine 2-3 times while in neutral.
Make sure the installed parts do not come in contact with any other parts.
Make sure there is no excessive stress on hoses and/or harnesses.
Make sure all installed parts have not loosened after stopping the engine.
