㧙㧙
INSTALLATION
(1) Disconnect the negative cable from the battery.
٨
This manual shows a typical installation. Actual installation may vary depending on the vehicle
application.
1. Removal of the Battery Cable
2. Hose Connection Layout
˴
٨
Do not install this product on a 24V vehicle. It may cause a fire.
WARNING
1. Removal of the Battery Cable
̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖
2. Hose Connection Layout
˴
˴
3. Wiring
̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖
4. Mounting the Components
̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖
5. After Installation
̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖
2-1. Connecting the Boost Sensor
̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖
2-2. Connecting the Solenoid Valve
̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖
2-3. Connection of a Swing Valve Type
̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖
2-4. Connection of a Poppet Valve Type
̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖̖
(1) Considering the hose and harness lengths, determine the appropriate mounting layout
of the Display Unit, Control Unit, Boost Sensor, and Solenoid Valve.
ADVICE
̪
Leave some slack for the harnesses and hoses to avoid tension during engine movement.
̪
Do not install any components in high temperature areas.
