(Attention: If the water tank is not installed, press the button ( )
on the remote controller, the host will prompt that the water tank is not
installed and the host will not work at this status.)
Press the button (
),the host will switch
to single room cleaning mode.
Press the button ( ), the host will
switch to border cleaning mode.
SINGLE ROOMM CLEANING
Applicable scenario: Used to clean the single room.
Setting method: Click the remote-control mode switch button (
) to select the single room cleaning mode to start the single room
cleaning.
Friendly Reminder: When it is only necessary to clean a single room,
please close the door and the host will do centralized cleaning in the
room.
If this room does not have a charging station, the host will return to the
original point after finishing cleaning.
BORDER SWEEPING
Applicable scenario: For indoor border cleaning, the host cleans along
the perimeter of fixed objects (such as walls), and returns to the charging
station after the border cleaning finished.
Setting method: Click the remote control mode switch button ( )
to select the border cleaning mode to start the border cleaning.
MANUAL CONTROL
Applicable scenario: Suitable for manual control cleaning.
Setting method: Click on the buttons
on the remote
