Hkoenig OptiV8, Instruction Manual

Page: 6 / 69

Fabric Setting Chart
Ironing Temperature Setting Guide
1.
Follow up the ironing instructions on the garment label. If there is not any
instruction label, but you know what kind of the fabric is, please refer to the fabric
setting chart described in this instruction manuai.
2.
The fabric setting chart is only validfor plain fabrics and not for materials to which
finishes, glosses etc., have been applied. Textile to which some kind of finish has been
applied (gloss, crinkle, relief etc.) is best ironed at lower temperature
3.
First sort laundry according to ironing temperature setting guide: wool with wool,
cotton with cotton, etc.
4.
The iron heats up more quickly than it cools down. Therefore, start ironing articles
that need to be ironed at the lowest temperature, such as those made of synthetic
fibres.
5.
If you do not know what kind of fabric the article is made of, iron a piece of the material which
is not visible when you wear to find out the appropriate temperature for your articles.
6.
When steam ironing woollen fabrics, shiny patches may occur. You may prevent this by
turning the article inside out and ironing the reverse side.
7.
After using of steam ironing for cotton fabrics, do not iron articles required by lower
temperature (such as nylon etc.) immediately.lt is advisable to adjust the selection button to
the lower setting, waiting for about 2-4 minutes till the blue indicator light turn off, and then
you can start ironing.
IMPORTANT HINTS:
Do not fillwater tank with vinegar, perfume, starch, chemically descaled water or descaling
agents.
Temperature
Setting
DRY ECO STEAM SUPREME STEAM
Fabric
Synthetics,
Silk,
Nylon,
Arcrylic,
Acetate
Synthetic,
Wool
Polyester
Polyester Cotton
Linen
Wool
lroning
Instruction Dry
lroning Steam
lroning Steam lroning
Steam
Selection
/