Hkoenig OptiV8, Instruction Manual

Page: 13 / 69

Trouble shooting
Problems Possible causes Solution
Iron won’t heat
Incorrect connection to the
main socket
Re-plug the unit to main socket.
Handle has not been laid down Lay handle down
Temp setting at "
"
position
Select the required ironing temperature
according to fabric setting chart.
Unknown malfunctions
Take to a qualified serviceman or
manufacturer or its service agent for
examination and repair.
No steam go out when
pressing steam switch
after
the desired
temperature is reached.
Temp setting at DRY position Select the required ironing temperature
according to fabric setting chart.
No water in water tank
Fill water into water tank
Filter has not been well installed
into water tank.
lnstall filter into water tank
Water tank has not been well
installed.
SIide water tank into the power base and it
will be locked in place until a "click" sound
produced.
" "
blink quickly, other
fabric indicator turn off,
buzzer sound a "Bi». All
buttons are non- workin. it
will resume when
re-energized again.
Defects with internai circuit,
unit corne into self protect
mode
Re-energized the unit again. If it still
can not resume, please take it to its
service agent or similarly qualified
persans for repair.
Never dispose of your product with other household waste. Please inform yourself
about the local rules on the separate collection of electrical and electronic products.
The correct disposai of your old product helps prevent potentially negative
consequences on the environment and human health.
Adeva SAS / H.Koenig Europe - 8 rue Marc Seguin, 77290 Mitry-Mory, France
www.hkoenig.com - sav@hkoenig.com - contact@hkoenig.com - Tél: +33 1 64 67 00 05