ENGLISH
57
Fig. 1
Fig. 2
SLEEP operation starts
Approx. 6 h
1 h
1 h
1 h
1 h
Aprox. 3 h
3 h
SLEEP operation stops
Temp. setting
Unit stop
Temp. setting
Unit stop
SLEEP mode starts
SLEEP mode stops
Rises 1ºC
Rises 1ºC
decreases 2ºC
decreases 2ºC
Rises 1ºC
Comfortable SLEEP
Before going to bed at night, you can simply press the SLEEP button and unit will
bring you a sound sleep in selected mode
In COOL mode
One hour after SLEEP mode starts, temp. will become 1ºC higher than temp. set-
ting. After running for another 1 hour, temp. rises by 1ºC further. Unit will run for 6
hours then stops automatically. Temp. is higher than temp. setting so that room
temp. won't be too low for your sleep.(
As shown in Fig.l)
In HEAT mode
One hour after SLEEP mode starts, temp. will become 2ºC lower than temp. set-
ting. After running for another 1 hour, temp. decreases by 2ºC further. Unit will run
for 3 hours at this temp. then increases another 1ºC and stops automatically
3 hours later. Temp. is lower than temp. setting so that room temp. won't be too
high for your sleep.
(As shown in Fig .2)
Power Failure Resume Function
If the unit is started for the first time, the compressor will not start running unless
3 minutes have elapsed. When the power resumes after power failure, the unit will
run automatically, the power indicator lights up, and 3 minutes later the compres-
sor starts running with the indicator lighting up.
Note:
In AUTO mode, unit will run in SLEEP function according to operation
mode.
In FAN mode, comfortable sleep is not Fig.2 available.
OPERATION
06Manual 3Hiyasu Eng 7/4/06 09:28 Página 57
