ENGLISH
51
Auto run, Fan operation
(1) Unit start
Press ON/OFF button, unit starts.
Previous operation status appears on display.
(Not Timer setting)
Power indicator on indoor unit lights up.
(2) Select operation mode
Press MODE button. For each press, operation
mode changes as follows:
Unit will run in selected mode.
Stop display at "
" AUTO or "
“FAN.
(3) FAN
For each press, fan speed changes as follows:
Unit will run at selected fan speed.
Note:AUTO is not available in FAN mode.
(4) Unit stop
Press ON/OFF button.
Only time remains on LCD.
All indicators on indoor unit go out.
Vertical flap closed automatically.
Hints
Remote controller can memorize settings in each operation mode. To run it
next time just select the operation mode and it will start with the previous set-
ting.
No reelecting is needed.(TIMER ON/OFF needs reelecting)
Cautions:
Note:
On cooling only unit, heating mode is not available,
After replacing batteries, press ON/OFF, and display becomes as
follows:
Operation mode: AUTO, Temp. No
Timer mode: No, Fan speed :AUTO
Note:
The above information is the explanation of the displayed informa-
tion therefore varies with those displayed in actual operation.
OPERATION
Enjoy yourself by just a gentle press.
06Manual 3Hiyasu Eng 7/4/06 09:28 Página 51
