ENGLISH
47
The machine is adaptive in following situation
I. Applicable ambient temperature range:
2. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similar qualified person. The type
of connecting wire is H05RN-F or H07RN-F
3. If the fuse on PC board is broken please change it with the type of T. 3.15A/250V.
4. The distance between the indoor unit and the floor should be more than 2m.
5. The wiring method should be in line with the local wiring standard.
6. After installation, the power plug should be easily reached.
7. The waste battery should be disposed properly.
8.The appliance must be installed on strong enough supporter.
9. The wiring diagram is attached inside the machine.
10. Through poor conditions of the electrical MAINS, shortly voltage drops can appear when starting the EQUIPMENT. This can
influence other equipment (eg. Blinking of a lamp). If the MAINS-IMPEDANCE Zmax=0.18+0.11j, such disturbances are not expec-
ted. (In case of need, you may contact your local supply authority for further information).
CAUTIONS
Cooling
Cooling
Heating
For 07, 09, 12
3mm
2
3G1,0mm
2
+2x0,75(1,0)mm
2
For 18
3mm
2
3G1,5mm
2
+2x0,75(1,5)mm
2
Indoor
Maximum: D.B/W.B
32ºC
Cooling
Minimum: D.B/W.B
18ºC/14ºC
Outdoor
Maximum: D.B/W.B
43ºC/26ºC
Minimum: D.B
18º
Indoor
Maximum: D.B
27ºC
Heating
Minimum: D.B
15ºC
Outdoor
Maximum: D.B/W.B
24ºC/18ºC
Minimum: D.B/W.B
-7ºC/-8ºC
06Manual 3Hiyasu Eng 7/4/06 09:28 Página 47
